225625
225768
Behind-the-Wheel

Rules regarding proper display of vehicle licence plates

Licence plate display

The humble licence plate has but one job, to positively identify the vehicle it is attached to.

Without license plates, how would we know who owns the vehicle? How would you complain about an erratic driver or report your stolen vehicle? Intersection Safety Camera (ISC) enforcement and Automated Licence Plate Recognition (ALPR) would be stymied and even the lowly parking ticket would have difficulty.

Most B.C. vehicles are issued with two licence plates. Also called number plates, these must be attached "one plate to the front and one plate to the rear of the vehicle."

In some cases, ICBC will only issue one plate. Motorcycles, trailers and demonstration plates are the three most common examples of this.

Effective May 1, ICBC will no longer issue licence plate validation decals. This change came about to facilitate on-line renewal of licences and insurance. You may remove the validation decal after that date if you wish to.

To support the transition, B.C. is making a one-time, $1 million investment in enhancing the ALPR program to help law enforcement identify uninsured drivers without relying on the decals.

Licence plates must be visible. A number plate must be kept entirely unobstructed and free from dirt or foreign material, so that the numbers and letters on it may be plainly seen and read at all times and so that the numbers and letters may be accurately photographed using a speed monitoring device or traffic light safety device.

Bicycle racks seem to be the most common obstruction, but anything that gets in the way could result in a $230 fine.

A licence plate must be mounted horizontally unless it is attached to a motorcycle. Then it may be attached in vertical position on the left front fork of a motorcycle, with the first number or letter at the bottom of the fork.

The rear licence plate must be illuminated by a lamp that is capable of displaying only white light so that the numbers on the licence plate are legible from a distance of 15 metres to the rear of the vehicle. The lamp must not project light to the rear and must be marked SAE / DOT L.

Rules for license plates on vehicles licensed under the Off Road Vehicle Act are similar to those for on-road vehicles. Two exceptions are that no licence plate light is required and the plate may be displayed on the front, rear or left side of the vehicle.

Some vehicle owners try to excuse their choices, particularly with regard to the front licence plate.

Some says it looks ugly, or there isn’t a mounting bracket or the bolts are too rusted. They throw it on the dash, wire it onto the bumper, slap decorations over top, the list seemed endless.

None are legal justifications to avoid a ticket.

This article is written by or on behalf of an outsourced columnist and does not necessarily reflect the views of Castanet.



More Behind the Wheel articles

225769
About the Author

Tim Schewe is a retired constable with many years of traffic law enforcement experience. He has been writing his column for most of the 20 years of his service in the RCMP.

The column was 'The Beat Goes On' in Fort St. John, 'Traffic Tips' in the South Okanagan and now 'Behind the Wheel' on Vancouver Island and here on Castanet.net.

Schewe retired from the force in January of 2006, but the column has become a habit, and continues.

To comment, please email

To learn more, visit DriveSmartBC



230329
The views expressed are strictly those of the author and not necessarily those of Castanet. Castanet does not warrant the contents.

Previous Stories



228921
223892


231011